Analog-digital Conversion

 Analog-digital Conversion

Amaxchip provides Analog to digital conversion Chinese data, Analog to digital conversion application circuit, Analog to digital conversion pin diagram, Analog to digital conversion application case data sheet.

Comments

Post a Comment

Popular posts from this blog

SN65HVD485EDGKR (transceiver)

Image
  A transceiver is a transmitter/receiver that exists in a single box. Whereas the phrase is most commonly associated with wireless communications equipment, it can also refer to transmitter/receiver devices in cable or optical fiber networks. This electrical device's primary function is to broadcast and receive various signals. The transceiver in radio communications can operate in half-duplex or full-duplex mode: half-duplex transceivers It can transmit or receive data, but not at the same instant. This is because the sender and receiver are linked to the same antenna through an electrical switch. This method is commonly used in ham radios, walkie-talkies, as well as other single-frequency Full-duplex transceivers. The radio transmitter and receiver can operate in tandem. Various radio frequencies are used for transmission and receiving. This mode may be found in both portable and cellular two-way radios. Full duplex is more efficient but the significance of both networks is de...
Read more

TL1963AQKTTRQ1

Image
  The TL1963AQKTTRQ is a low-dropout (LDO) regulator that is designed for the fast transient response. With a dropout voltage of 340 mV, the device can deliver 1.5 A of output current. The operating quiescent current is 1 mA, and in shutdown, it drops to less than 1 mA. The output voltage ranges between 1.21 and 20 volts. Quiescent current is well-controlled; unlike many other regulators, it does not rise in dropout.The TL1963AQKTTRQ regulators feature a low output noise and fast transient response, making them excellent for sensitive RF supply applications. With output capacitors as low as 10 F, the TL1963AQKTTRQ regulators are stable. Small ceramic mlcc capacitors can be employed instead of ESR, as is the case with most other regulators. In TL1963AQKTTRQ voltage regulators, reverse-battery protection, current limiting, heat limiting, and reverse-current protection are all built into the internal protection circuitry.Fixed output voltages of 1.5 V, 1.8 V, 2.5 V, and 3.3 V are ava...
Read more

Types of Transmission Line

Image
  Transmission line is a cable that transfer Electromagnetic wave from source to destination. Conventional electrical cables are adequate for carrying low frequency alternating current (AC), such as mains electricity, which reverses direction 100 to 120 times per second, and audio transmissions.  however, Electrical cables cannot be utilized to carry radio wave flux over around 30 kHz since the energy starts to radiate off the cable as radio signals, resulting in power dissipation. Radio frequency currents also generally reflect from cable irregularities like connections and joints and flow back across the cable towards to source. Typically transmission lines are distinguished by having uniform cross sectional dimensions over entire length, resulting in a standard impedance, known as the characteristic impedance, to minimize reflections. Parallel lines (ladder lines, twisted pairs), coaxial cable, and planar transmission lines such as stripline and microstrip are exampl...
Read more