PIC12F675-I/SN

 

Automatically controlled mechanisms are preferred in almost every system existing today. These mechanisms are possible through microcontrollers that are skilfully programmed. PIC12F675-I/SN  is a CMOS technology consisting of an 8 pin, 8-bit PDIP/SOIC packaged microcontroller, accredited to Microchip Technology Incorporation. The PIC12F675-I/SN features a single comparator along with an external indicator, 10 bit 4-channel of ADC, and EEPROM of 128 bytes that is well suited and can be easily programmed accordingly for automotive, appliances, and manufacturing purposes. The article on the 12F675 PIC microcontroller below shows how it can be programmed and used for a series of projects.


 

 

Due to the cost and small size, the PIC12F675 is very popular among hobbyists and engineers. Although the PIC12F675is an older computer, it is still a useful one and includes the standard 10-bit ADC with many peripherals built into it. In reality, the analog comparator and the ADC have two timers that can read analog values from 4 pins. This computer can do several distinct tasks with its 1k of programming memory. The 12F675 microcontroller is packaged into an 8-pin chip and it is packed with peripherals and has a 10-bit ADC in-built despite its width. There are 1024 words of program memory, 64 bytes of RAM, and 128 bytes of EEPROM, an internal oscillator, ADC timers, and a comparator in the 12F675.

 

The microcontroller PIC12F675is intended for low-end applications and systems. Since it has a high flash memory rewrite period, it is useful for engineers to learn and explore. Flash memory of 2 kilobytes is allotted to the controller which is sufficient to execute simple programs for beginners. 25mA of threshold current is dedicated to 6 GPIO pins to operate various external devices and sensors. There are exceptionally few features on this controller and cannot be utilized for planning progressed applications.PIC12F675is best utilized for novices who need to get to the microcontroller stage to construct programs.

 

Although PIC12F675 has RISC architecture CPU with interrupts capabilities. Unlike other PIC microcontrollers, it does not comprise the USART module and memory space is quite smaller than other controllers. On the board, SPI and I2C communications are not open, but for some electronic applications, some functions such as power-on reset, watchdog timer, sleep mode and brown-out detect (BOD) make this system an ideal option. It also has an outer oscillator with a twenty megahertz frequency.

 

All these features make this product handy for beginners and are well suited for small-scale applications. The purchasing range makes this product economical for learners to test their abilities to max as it provides a little bit of everything. More than sufficient amount of read and write cycles makes this product a learning and testing tool. 

 

Continue considering Amaxchip as your electronic components distributor we continue to strive to give you not only the best quality electrical parts online but also be genuine when it comes both price and suggestions.

  

Key Features of the PIC12F675:

-          There is a 4 MHz internal oscillator

-          2KBs of flash memory

-          16 bytes of random access memory.

-           The voltage on which this board works is between 2 and 5.5 volts.

-          The severe in-out current has a value of 25 mA.

-          The temperature at which it functions is from -40 C to +25 C.

-          1.7 kilo bytes of memory

-          RAM capacity of 64 bytes.

-          Two timers of 8 bit and 16 bit that can be also used as a counter if programmed accordingly.

Comments

Post a Comment

Popular posts from this blog

TL1963AQKTTRQ1

Image
  The TL1963AQKTTRQ is a low-dropout (LDO) regulator that is designed for the fast transient response. With a dropout voltage of 340 mV, the device can deliver 1.5 A of output current. The operating quiescent current is 1 mA, and in shutdown, it drops to less than 1 mA. The output voltage ranges between 1.21 and 20 volts. Quiescent current is well-controlled; unlike many other regulators, it does not rise in dropout.The TL1963AQKTTRQ regulators feature a low output noise and fast transient response, making them excellent for sensitive RF supply applications. With output capacitors as low as 10 F, the TL1963AQKTTRQ regulators are stable. Small ceramic mlcc capacitors can be employed instead of ESR, as is the case with most other regulators. In TL1963AQKTTRQ voltage regulators, reverse-battery protection, current limiting, heat limiting, and reverse-current protection are all built into the internal protection circuitry.Fixed output voltages of 1.5 V, 1.8 V, 2.5 V, and 3.3 V are availab
Read more

XC6SLX16-3CPG196C (FPGA)

Image
  FPGAs are semiconductor devices that are built together around the matrix of configurable logic blocks (CLBs) coupled using programmable interconnects. Following production, FPGAs can indeed be reprogrammed to meet specific industry or feature requirements. FPGA technology is gaining momentum in a variety of industries, including aerospace and military, automotive, consumer devices, high-performance data and networking processing, multimedia and image processing, wired and wireless communications. Different manufacturer companies are operating in the world. Xilinx, Inc. (WE); Intel Corporation (US); Lattice Semiconductor Corporation (US); Microchip Technology Inc. (US); and Quick Logic Corporation are the top contenders in the FPGA industry (US).XC6SLX16-3CPG196C is FPGA by the Spartan 6 family launched by Xilinx. The main features of this module are, Logic optimized FPGAs that requires low cost for designing. The performance parameter analysis reveals that the module XC6SLX16-3
Read more

SN65HVD485EDGKR (transceiver)

Image
  A transceiver is a transmitter/receiver that exists in a single box. Whereas the phrase is most commonly associated with wireless communications equipment, it can also refer to transmitter/receiver devices in cable or optical fiber networks. This electrical device's primary function is to broadcast and receive various signals. The transceiver in radio communications can operate in half-duplex or full-duplex mode: half-duplex transceivers It can transmit or receive data, but not at the same instant. This is because the sender and receiver are linked to the same antenna through an electrical switch. This method is commonly used in ham radios, walkie-talkies, as well as other single-frequency Full-duplex transceivers. The radio transmitter and receiver can operate in tandem. Various radio frequencies are used for transmission and receiving. This mode may be found in both portable and cellular two-way radios. Full duplex is more efficient but the significance of both networks is de
Read more